BS-21 ExeN Stainless steel
The BS-21 ExeN Stainless steel Ex aproved beacon is made of anodized aluminum alloy and powder coated to assure the quality of the product.
- Lens available in: Clear, Red, Yellow, Green, Blue
- IP rating: IP66
- Weight: 6,5 kg
- Max /Min temperature: 58 C / -50C
Installation, Operation and maintenance
- Secure the BS-21 ExeN Flashlight to ceiling or wall with three screws.
- Termination is accessed in e-chamber, by removing lid fastened with four screws.
- Be sure that the Ex-product is connected to the correct voltage, and current stated on labels on the model.
- The lid screws for the termination chamber should be fastened with a torque of 2 Nm to assure the IP-rating.
- Use only correctly certified cable glands/bling plugs. Reflecting the same IP & temp. spec. as stated on certified label.
- Outside earthing: Min 4mm² wire.
- Inside earthing: Use marked earth screw. Min.cross section equal to one of the wire on incoming cable.
- Delivered with 2 x M20 plastic Ex blanking plugs.
- WARNING: Do not open this Ex-product when it is energized.
- This Ex-product shall only be used in an area of low risk of mechanical danger.
- This product is supplied with a two years warranty against defective materials and workmanship.
