BP-860 ceiling speaker

Plastic ceiling loudspeaker BP-860

The new improved mounting system on the BP-860 makes this the most flexible 8” ceiling speaker DNH has made. The hooks are changeable to set upside down, allowing up to 55 mm on the ceiling thickness. The placement of the transformer makes this ceiling speaker very low and easy to place on the narrowest places. The PA ABS material is of course V0 and Halogen free.

 

  • Mounting with hooks
  • Effective frequency Range: 60 – 150000 Hz
  • Weight: 1,2 kg

 

 

Installation, Operation and maintenance

  • Do not open loudspeaker when energized.
  • Install the ring into the cut-out hole turning the screws connected to the three hooks, screw clockwise until the ring is fixed to the ceiling.
  • Hooks can be mounted both ways to fit the roof thickness.
  • Connect cable to terminal. If 70V, replace red cable with the green cable in the terminal.
  • Turn the grill gently clockwise within the ring until it stops.
  • For optimum performance, always use the correct voltage / power limits as stated.
  • This loudspeaker comes with a two years warranty against factory defects.