BPF-560 ceiling speaker

Plastic ceiling loudspeaker BPF-560

The new improved mounting system makes this the most flexible 5” ceiling speaker DNH has made. The hooks are changeable to set upside down, allowing up to 55mm on the ceiling thickness. The easy mounted dust box has a M20 gland and a M20 blanking plug on the side as standard. The PA ABS material is of course V0 and Halogen free.


  • Mounting with hooks
  • Effective frequency Range: 190 – 20000 Hz
  • Weight: 0,9 kg



Installation, Operation and maintenance

  • Take care when the loudspeaker is energized. (100V or 70V)
  • Install the ring into the cut-out hole turning the screws connected to the three hooks, screw clockwise until the ring is fixed to the ceiling.
  • Lead cable through cable gland and connect to terminal. Screw box back into place with one screw.
  • Turn the grill gently clockwise within the ring until it stops.
  • Hooks can be mounted both ways, see drawing at the top of the page.
  • For optimum performance, always use the correct voltage / power limits as stated.
  • This loudspeaker comes with a two years warranty against factory defects.