BPF-860 ceiling speaker

Plastic ceiling loudspeaker BPF-860

The new improved mounting system from the BPF-860 makes this the most flexible 8″ ceiling speaker DNH has made. The hooks are changeable to set upside down, allowing up to 55 mm on the ceiling thickness. The easy mounted dust box has a M20 gland and a M20 blanking plug on the side as standard. The PA ABS material is of course V0 and halogen free.

 

  • Mounting with hooks
  • Effective frequency Range: 140 – 20000 Hz
  • Weight: 1,5 kg

 

 

Installation, Operation and maintenance

  • Take care when the loudspeaker is energized. (100V or 70V)
  • Install the ring into the cut-out hole turning the screws connected to the three hooks, screw clockwise until the ring is fixed to the ceiling.
  • Hooks can be mounted both ways to fit the roof thickness.
  • Lead cable through cable gland and connect to terminal. Screw box back into place with one screw.
  • Connect cable to terminal. If 70V, replace red cable with the green cable in the terminal.
  • Turn the grill gently clockwise within the ring until it stops.
  • For optimum performance, always use the correct voltage / power limits as stated.
  • This loudspeaker comes with a two years warranty against factory defects.