CAPEEX-6×2 atex projector

Projector ATEX loudspeaker CAPEEX-6×2

The CAPEEX-6×2 is an ATEX-approved bi-directional speaker made from aluminum. Used for cabins, hallways etc. in hazardous areas. Two separate loudspeakers, two transformers and two terminals in one Ex housing (A & B system).

 

  • Bracket mounting
  • Effective frequency Range: 190 – 20000 Hz
  • Weight: 3,8 kg

 

 

Installation, Operation and maintenance

  • Do not open loudspeaker when energized.
  • Two separate loudspeakers, two transformers and two terminals in one Ex housing (A & B system).
  • Enter the e-chamber by loosening the screws on the lid and terminate the cables in the screw terminals.
  • Connect the speakers to the same phase.
  • Fasten loudspeaker to wall or ceiling with three screws.
  • Fasten lid screws with a torque of 2 – 3 Nm to assure the IP rating.
  • For optimum performance, always use the correct voltage / power and operate within the frequency limits as stated.
  • Use only certified/specified cable glands and blanking plugs.
  • Standard model delivered with four M20 Ex approved plastic blinding plugs.
  • For optimum performance, always use the correct voltage / power limits as stated.
  • This loudspeaker comes with a two years warranty against factory defects.