CAREEX-6×2 atex projector
ATEX-approved bi-directional speaker made from aluminum. Used for cabins, hallways etc. in hazardous areas. Bracket mounted.
- Foot bracket mounting
- Effective frequency Range: 190 – 20000 Hz
- Weight: 3,8 kg
Installation, Operation and maintenance
- Do not open loudspeaker when energized.
- Two separate loudspeakers, two transformers and two terminals in one Ex housing. (A & B system)
- Enter the e-chamber by loosening the screws on the lid and terminate cable in the screw terminal.
- Connect the speakers to the same phase.
- If earthing, earth correctly using the specially marked screws.
- Fasten lid screws with a torque of 2 – 3 Nm to assure the IP rating.
- Secure the loudspeaker to ceiling or wall by four screws by use of the extruded aluminum brackets on each side.
- Use only certified / specified cable glands and blanking plugs.
- Standard model delivered with four M20 Ex approved plastic blinding plugs.
- For optimum performance, always use the correct voltage / power limits as stated.
- This loudspeaker comes with a two years warranty against factory defects.
