Are you in need for an ATEX horn speaker that is light in weight but heavy on sound coverage? The long flare version of DSP-15EExmNL is an excellent choice when required SPL needs to be high.
Bracket mounting
Effective frequency Range: 380 – 7000 Hz
Weight: 2,8 kg
Installation, Operation and maintenance
Do not open loudspeaker when energized.
Remove lid by four screws, lead cable through the cable gland and connect to terminal with required tapping.
Check that the gasket is fitted correctly on to the lid. Do not use any lubricants on the gasket.
Screw lid back into place by four screws with a torque of 1,8 Nm to assure the IP rating.
To change the position of the loudspeaker, please adjust the standard U- bracket (by loosening / tightening the screws) as required.
Use only certified/specified cable glands and blanking plugs, reflecting the same IP rating and temperature range as the loudspeaker.
Standard model delivered with two M20 Ex approved plastic blinding plugs.
DSP-15 EExmNL(T) can be supplied with three different bracket systems, according to customer requirements.
For optimum performance, always use the correct voltage / power limits as stated.
This loudspeaker comes with a two years warranty against factory defects.